Internet Explorer, Chrome Browser, Firefox Browser, Safari Browser
Siemens at the Hannover Messe 2019
Hanover, 01 April to 05 April 2019
Save the date2019-04-01T00:00:002019-04-05T00:00:00Europe/Parisuse-titleSiemens at the Hannover Messe 2019This year's trade fair slogan "Digital Enterprise – Thinking industry further!"Roadmap for the factory and process automation of the futureScalable concept up to the MindSphere IoT operating system leads to renaissance on the shopfloorEnhanced portfolio: cutting-edge technologies such as artificial intelligence and Edge computing increase productivity and flexibilityHanover
On the first day of the Hannover Messe, April 1, Klaus Helmrich welcomed you to the annual Siemens Press Conference. As member of the Managing Board of Siemens AG, Klaus Helmrich is responsible for the Digital Industries Operating Company. The Press Conference took place at 6:30 PM in the Trade Fair's Convention Center, Room 1 A/B.
Mr. Helmrich talked about the latest developments of digitalization and the next step towards the digital transformation in the manufacturing and process industries under the theme "Digital Enterprise – Thinking industry further!".
Mr. Helmrich talked about the latest developments of digitalization and the next step towards the digital transformation in the manufacturing and process industries under the theme "Digital Enterprise – Thinking industry further!".
Save the date2019-04-01T00:00:002019-04-05T00:00:00Europe/Parisuse-titleSiemens at the Hannover Messe 2019This year's trade fair slogan "Digital Enterprise – Thinking industry further!"Roadmap for the factory and process automation of the futureScalable concept up to the MindSphere IoT operating system leads to renaissance on the shopfloorEnhanced portfolio: cutting-edge technologies such as artificial intelligence and Edge computing increase productivity and flexibilityHanover
On the first day of the Hannover Messe, April 1, Klaus Helmrich welcomed you to the annual Siemens Press Conference. As member of the Managing Board of Siemens AG, Klaus Helmrich is responsible for the Digital Industries Operating Company. The Press Conference took place at 6:30 PM in the Trade Fair's Convention Center, Room 1 A/B.
Mr. Helmrich talked about the latest developments of digitalization and the next step towards the digital transformation in the manufacturing and process industries under the theme "Digital Enterprise – Thinking industry further!".
Mr. Helmrich talked about the latest developments of digitalization and the next step towards the digital transformation in the manufacturing and process industries under the theme "Digital Enterprise – Thinking industry further!".
Press conference at the Hannover Messe 2019
Event Pictures
Klaus Helmrich at the press conference at Hannover Messe 2019
Under the slogan "Digital Enterprise – Thinking industry further!" Siemens demonstrates how companies of any size can use industry-specific solutions to increase their flexibility and productivity and to develop new business models. "Innovation partnerships between large companies and SMEs are just as essential as cooperation between business, science and politics," Klaus Helmrich notes.
Siemens leads industry to the next level of digital transformation
"Through the integration of cutting-edge technologies into our portfolio, we can help industrial companies to benefit from rapidly growing data volumes in new, wide-ranging ways. With the use of technologies such as artificial intelligence, Edge computing and additive manufacturing, we are paving the way for the future of industry. We are also rethinking process control technology and introducing the innovative web-based Simatic PCS neo process control system," Klaus Helmrich, Member of the Managing Board of Siemens AG and CEO of Digital Industries, explains at the press conference for the Hannover Messe on April 1.
Siemens at Hannover Messe 2019
Klaus Helmrich, Managing Board Member of Siemens AG and CEO of Digital Industries at the Hannover Messe press conference. Siemens is presenting numerous additions to its Digital Enterprise portfolio for the next level of digital transformation in the discrete and process industries.
Siemens leads industry to the next level of digital transformation
"Through the integration of cutting-edge technologies into our portfolio, we can help industrial companies to benefit from rapidly growing data volumes in new, wide-ranging ways. With the use of technologies such as artificial intelligence, Edge computing and additive manufacturing, we are paving the way for the future of industry. We are also rethinking process control technology and introducing the innovative web-based Simatic PCS neo process control system," Klaus Helmrich, Member of the Managing Board of Siemens AG and CEO of Digital Industries, explains at the press conference for the Hannover Messe on April 1.
Klaus Helmrich at the press conference at Hannover Messe 2019
Under the slogan "Digital Enterprise – Thinking industry further!" Siemens demonstrates how companies of any size can use industry-specific solutions to increase their flexibility and productivity and to develop new business models. "Innovation partnerships between large companies and SMEs are just as essential as cooperation between business, science and politics," Klaus Helmrich notes.
Siemens at Hannover Messe 2019
Klaus Helmrich, Managing Board Member of Siemens AG and CEO of Digital Industries at the Hannover Messe press conference. Siemens is presenting numerous additions to its Digital Enterprise portfolio for the next level of digital transformation in the discrete and process industries.
Booth Visit Merkel and Löfven
Hannover Messe 2019: German Chancellor Angela Merkel and Prime Minister of Sweden, Stefan Löfven visiting the Siemens booth
At the Hannover Messe 2019 Joe Kaeser (President and Chief Executive Officer of Siemens AG) and Klaus Helmrich (Member of the Management Board of Siemens) show German Chancellor Angela Merkel and Swedish Prime Minister Stefan Löfven the future of production.
Picture from left to right: Joe Kaeser (President and Chief Executive Officer of Siemens AG), Dr. Angela Merkel, German Chancellor, Stefan Löfven, Prime Minister of Sweden and Klaus Helmrich, Member of the Managing Board of Siemens and CEO Digital Industries.
Hannover Messe 2019: German Chancellor Angela Merkel and Prime Minister of Sweden, Stefan Löfven visiting the Siemens booth
At the Hannover Messe 2019 Joe Kaeser (President and Chief Executive Officer of Siemens AG) and Klaus Helmrich (Member of the Management Board of Siemens) show German Chancellor Angela Merkel and Swedish Prime Minister Stefan Löfven the future of production.
Picture from left to right: Joe Kaeser (President and Chief Executive Officer of Siemens AG), Dr. Angela Merkel, German Chancellor, Stefan Löfven, Prime Minister of Sweden and Klaus Helmrich, Member of the Managing Board of Siemens and CEO Digital Industries.
Hannover Messe 2019: German Chancellor Angela Merkel and Prime Minister of Sweden, Stefan Löfven visiting the Siemens booth
At the Hannover Messe 2019 Joe Kaeser (President and Chief Executive Officer of Siemens AG) and Klaus Helmrich (Member of the Management Board of Siemens) show German Chancellor Angela Merkel and Swedish Prime Minister Stefan Löfven the future of production.
Picture from left to right: Joe Kaeser (President and Chief Executive Officer of Siemens AG), Dr. Angela Merkel, German Chancellor, Stefan Löfven, Prime Minister of Sweden and Klaus Helmrich, Member of the Managing Board of Siemens and CEO Digital Industries.
Hannover Messe 2019: German Chancellor Angela Merkel and Prime Minister of Sweden, Stefan Löfven visiting the Siemens booth
At the Hannover Messe 2019 Joe Kaeser (President and Chief Executive Officer of Siemens AG) and Klaus Helmrich (Member of the Management Board of Siemens) show German Chancellor Angela Merkel and Swedish Prime Minister Stefan Löfven the future of production.
Picture from left to right: Joe Kaeser (President and Chief Executive Officer of Siemens AG), Dr. Angela Merkel, German Chancellor, Stefan Löfven, Prime Minister of Sweden and Klaus Helmrich, Member of the Managing Board of Siemens and CEO Digital Industries.
Information on Siemens at the Hannover Messe
Visitation Gerätewerk Erlangen
Booth Pictures
Siemens showcases smart solutions for industry-specific implementation of Industrie 4.0
Siemens will be placing smart solutions for the industry-specific implementation of Industrie 4.0 at the heart of its Hannover Messe 2019 presentation under the banner "Digital Enterprise – Thinking industry further!". Over an exhibition space of around 4,000 square meters in Hall 9, Siemens will be showcasing these solutions with an array of new additions to its Digital Enterprise offering designed to enable the digital transformation of the discrete and process industries.
Siemens showcases smart solutions for industry-specific implementation of Industrie 4.0
Siemens will be placing smart solutions for the industry-specific implementation of Industrie 4.0 at the heart of its Hannover Messe 2019 presentation under the banner "Digital Enterprise – Thinking industry further!". Over an exhibition space of around 4,000 square meters in Hall 9, Siemens will be showcasing these solutions with an array of new additions to its Digital Enterprise offering designed to enable the digital transformation of the discrete and process industries.
Press releases about products and solutions
Press Release02 April 2019
Siemens extends connectivity to all main substation assets
- SensgearTM technology launch for digital connectivity of switchgear products
- New Sensformer® advanced with applications based on digital twin simulation of transformers
- Portfolio extension comes with comprehensive data analytics for added transparency, enhanced productivity, and advanced intelligen...
Press Release02 April 2019
Siemens and EDAG cooperate in projects for the industrial application of additive manufacturing
- Improving engineering and production processes
Press Release01 April 2019
Software update for planning and simulation tool
- Integration into the digital workflow with data exchange via AutomationML
- Import and simulation of existing TIA Portal projects V15.1
- Configuration option of modular switches
- Simulation of broadcast with definition of broadcast limits
Press Release01 April 2019
Save time in engineering with the new Comos Version 10.3
- New engineering portal speeds up plant engineering
- Object queries now editable in Comos web application
- Modular engineering with intelligent templates and central data storage
Press Release01 April 2019
Highest computing and graphic performance for future technologies
- Highest computing and graphic performance through up to two Intel Xeon CPUs and Nvidia Quadro P5000 GPUs
- Platform for artificial intelligence (AI), automatic learning, edge computing and machine vision
- High degree of expandability through six PCIe slots, six USB interfaces and a serial port
- Product designed for industrial environments with full-metal enclosure and high electromagnetic compatibility (EMC)
Press Release01 April 2019
Simit V10.1 – More openness for even more integrated simulation
- Re-use of domain-specific simulation models
- Standardized interfaces for more system openness
- Real-time simulation of systems and machinery
Press Release01 April 2019
Simple machine integration with OPC UA interface
- Data interface according to OMAC PackML
- First implementation of companion specification in a controller
Press Release01 April 2019
Simatic PCS 7 Plant Automation Accelerator V3.0 - for more flexible and integrated plant engineering
- Simatic PCS 7 Plant Automation Accelerator V3.0 plant and automation engineering software closes the gap between plant engineering...
- More powerful, more open version
- Increased system openness based on GSDML and NE150 standards
- Seamless engineering through the integration of various Simatic components
Press Release01 April 2019
Web-based control system sets new standards in the process industry
- New development – Simatic PCS neo sets new standards in process automation
- Intuitive usability and a single workbench for all tasks
- Consistent object-oriented data management
- Unique, global, web-based collaboration in engineering and operation
- Scalable from small process modules up to the largest process plants in the world
Press Release01 April 2019
XHQ Operations Intelligence Software V6.0 – improved performance and end-user experience
- New Edge functionality provides better and more secure access to remote data
- Simplified integration of engineering data
- HTML5-based, new web browser client
- Server virtualization support increases efficiency and performance
Press Release01 April 2019
Industrial PC for cost-optimized applications in the industrial environment
- SIMATIC IPC527G: Platform for cost-optimized applications in the industrial environment
- High performance and flexibility, fast availability
- Protection of investment thanks to support of existing systems
Press Release29 March 2019
Virtual testing of Siemens Siprotec 5 protective devices with a digital twin
- Can be simulated in a cloud in just minutes
- Saves time and lowers operating costs
- Simplifies training and speeds up troubleshooting
Press Release28 March 2019
Siemens expands its portfolio for SF6-free medium-voltage switchgear
- 8DJH 12 switchgear is expanding the "blue GIS" portfolio in the medium-voltage range
- "Clean Air" used as the F gas-free insulating medium
- Follows the proven operating concept for load-break switchgear
- Connection to IoT platforms integrated
Press Release28 March 2019
New Simogear Reluctance Geared Motor – compact, rugged, and energy efficient
- Extremely high efficiency and low losses especially in partial load
- High dynamics due to low moment of inertia
- Safe operation due to low motor temperature
- Easy to commission – simply enter the motor code into the converter
Press Release28 March 2019
TIA Portal engineering – goes cloud!
- The TIA Portal moves into the cloud: flexible use of the engineering framework in various phases of development
- Fast, flexible access to pre-installed engineering environments
- Integration of the widest range of PC and tablet hardware into the development process
- Fast access to project data through storage in a cloud-based FileShare
Press Release26 March 2019
Siemens launches an initiative for fast ramp-up of production facilities together with industry partner companies
- Many companies and institutes from the University of Stuttgart are already participating in the "Fast Ramp-Up Challenge".
- Additional companies can join the initiative until May 23.
- Ramp-up of prototypes within only two days planned at the ARENA2036 innovation factory
- Open, cloud-based IoT operating system MindSphere in action
Press Release25 March 2019
Optical reader optimizes production processes and supply chains
- Higher reading rates and reading reliability
- Additional Gigabit Ethernet interface for diagnostic and service purposes
- Easy connection to cloud applications via Simatic S7-1500 and CP 1545-1
- Powerful, flexible accessories and easy handling
Press Release21 March 2019
Siemens CloudConnect simplifies IIoT data transfer to cloud-based solutions
- New CP 1545-1 communications processor for use with Simatic S7 1500
- New Simatic CloudConnect 7 Industrial IoT Gateway for existing systems
- Event-driven communication reduces network load and costsStandardized MQTT protocol enables transmission to various cloud platform...
Press Release14 March 2019
Sinamics S120 drive system - firmware and hardware updates increase user-friendliness
- New firmware V5.2 for even easier operation of Sinamics S120 drive systems
- Integration of the web server with new, responsive design and no special commissioning tools for diagnostics, maintenance and serv...
- Parallel connection of Active Line Modules (ALM) provides an extended performance range for booksize versions
- Users benefit from increased rated power without additional chassis unit and energy exchange in the DC link
Press Release28 February 2019
Sidrive IQ: Greater efficiency with Simotics Connect 400 connectivity module
- Size AH100 to AH450 low-voltage motors can be retrofitted in future with the Simotics Connect 400 connectivity module
- Simotics Connect 400 enables motor operating data to be sent to cloud-based Sidrive IQ Fleet App without any structural modificati...
- Regular evaluation improves efficiency, optimizes serviceability and makes for an extended service life
Press Release18 February 2019
Versatile, seamless across the system, safety integrated: new servo drive system for protective extra-low voltage range
- New Simatic Micro-Drive servo drive system for the protectiveextra-low voltage range system (under 60VDC) with scope for individual combination ...
Press Release18 February 2019
New digital service optimizes the maintenance of machines and plants
- Lifecycle Management Suite for optimal maintenance management
- Greater transparency of service activities and system status
- Maintenance Process optimization reduces maintenance costs
Press Release18 February 2019
New generation of high-end industrial PCs – high performance and flexibility in the industrial environment
- First rack, box and panel PCs with Xeon, Core i7, Core i5, Core i3 and 8th generation Celeron processors from Intel
- High level of data and system availability in the 19" rack or control cabinet, or directly on the machine
- Maximum expandability for flexible integration into new and existing systems
Press Release18 February 2019
Siemens updates NX Software with Artificial Intelligence and Machine Learning to increase productivity
- Latest release of NX software enhanced with new capabilities that leverage machine learning and artificial intelligence technology...
- Siemens' Digital Innovation Platform enhanced with machine learning-driven user-interface solutions to enhance design process impr...
Press Release18 February 2019
Siemens and Festo integrate Multi-Carrier-System into Bosch Rexroth transfer system
- Collaboration on new overall system
- More flexible, more efficient production processes
Press Release18 February 2019
Siemens to showcase new applications for machine-level edge computing
- Edge application Analyze MyWorkpiece /Capture enables data capturing around every aspect of workpiece machining
- Analyze MyWorkpiece /Toolpath designed for workpiece data visualization and analysis
- Edge application Analyze MyMachine /Condition determines the condition of machine tools
Press Release14 February 2019
powermanager power monitoring software with direct cloud connection
With the new version of the powermanager power monitoring software, power data can now be directly transferred into open, cloud-ba...
Press Release14 February 2019
Siemens presents new form of data transmission for busbar trunking systems
- Powerline technology added to Sivacon 8PS busbar trunking systems
- Current and data are transmitted in parallel via the conductors
- Additional data cables and complex cabling are no longer needed
Press Release12 February 2019
New IoT data platform facilitates entry into cloud-based energy management
With the 7KN powercenter3000 IoT data platform, Siemens is expanding its digitalization solutions for electrical power distributio...
Further Information
Press Pictures
Siemens and EDAG cooperate in projects for the industrial application of additive manufacturing
Dr. Martin Hillebrecht, Head of Innovation EDAG Engineering Group, Rainer Wittich, CEO EDAG Production Solutions meet Dr. Wolfgang Heuring, CEO Business Unit Motion Control at Siemens and Dr. Karsten Heuser, VP Additive Manufacturing at Siemens (from left) at the Siemens EDAG "NextGenSpaceframe 2.0" Automotive use case.
Siemens and EDAG cooperate in projects for the industrial application of additive manufacturing
Siemens is intensifying its cooperation with the EDAG Group as a leading global independent engineering company for the automotive industry, in order to further promote industrial applications of additive manufacturing (AM) and to make engineering and production processes more efficient.
Main assets of substation are connective
With the combination of the digitally connected Sensformer transformers and the new Sensgear all substation transmission assets are now fully connective. All devices are connected via a smart and robust Internet of Things (IoT) gateway that securely transmits the required information to a cloud-based storage and visualization platform.
Simit V10.1 - More openness for even more integrated simulation
Siemens has extended its Simit simulation platform for virtual commissioning and operator training to include numerous new functions. The additions in Version 10.1 improve the simulation of automation applications through the re-use of various domain-specific simulation models over the entire lifecycle of manufacturing and process systems.
Web-based control system sets new standards in the process industry
Siemens sets new standards in process automation and is launching an innovative web-based process control system for all industries at the Hannover Messe. Simatic PCS neo is a brand-new system software, which offers companies in the process industry unique opportunities in the age of digitalization.
Simple machine integration with OPC UA interface
Siemens has succeeded in implementing an OPC UA data interface in a Simatic S7-1500 controller according to a companion specification using the OMAC PackML (Packaging Machine Language). This makes it easier for end customers and line integrators to integrate packaging machines and connect them to line or MES systems.
Software update for planning and simulation tool
Siemens is launching a new version of the software tool for planning and simulating Profinet automation networks on the market. Sinetplan V2.0, the Siemens network planner, supports plant planners, builders and operators of automation systems and Profinet networks already in the planning phase and facilitates the professional and proactive simulation of a plant network.
Highest computing and graphic performance for future technologies
With the Simatic IPC1047, Siemens is launching an industrial PC platform onto the market which is distinguished by the highest computing and graphic performance.
The IPC can handle applications with high performance requirements, such as big data analyses, and thus offers a platform for artificial intelligence (AI), machine learning, edge computing, and machine vision.
The IPC can handle applications with high performance requirements, such as big data analyses, and thus offers a platform for artificial intelligence (AI), machine learning, edge computing, and machine vision.
Simatic PCS 7 Plant Automation Accelerator V3.0 - for more flexible and integrated plant engineering
Siemens has extended its engineering software for planners and automation engineers, Simatic PCS 7 Plant Automation Accelerator 3.0 (PAA), to include new functions for even more flexible and integrated automation engineering. With this latest software version, Simatic PCS 7 automation projects can be configured even more easily and efficiently. With Version 3, the PAA software closes the gap between plant engineering and the process control system.
Save time in engineering with the new Comos Version 10.3
In the latest version 10.3 of its Comos CAE software solution for the process industry, Siemens is focusing on increasing efficiency in engineering. Using the Comos Engineering Portal included in this version, engineering processes can be significantly shortened. In addition to this, new developments and functional expansions are available for the current version in modular engineering and for mobile applications.
XHQ Operations Intelligence Software V6.0 - improved performance and end-user experience
Siemens launches the new release V 6.0 of their flagship XHQ Operations Intelligence with enhanced performance while increasing the overall usability at the same time. With the new version, users benefit from numerous enhancements such as edge functionality.
Optical reader optimizes production processes and supply chains
Siemens has introduced the Simatic MV550, the second optical reader in its new high-end Simatic MV500 series. The device is characterized by higher computing power, which allows a fast reading process and increased reading reliability – even under difficult conditions.
Siemens CloudConnect simplifies IIoT data transfer to cloud-based solutions
The Siemens CloudConnect portfolio simplifies data transfer within the IIoT (Industrial Internet of Things) to cloud-based solutions. To this end, Siemens is offering the new Simatic CP 1545-1 communications processor, designed for use with Simatic S7-1500 in modern automation environments.
Versatile, seamless across the system, safety integrated: new servo drive system for protective extra-low voltage range
Siemens is extending its drive portfolio in the safety extra-low voltage range for DC/EC motors with 24 to 48 V by introducing a new servo drive system known as the Simatic Micro-Drive. The new system offers scope for individual combination with UL-certified components and comprises the PDC (Profidrive Control) servo converter in conjunction with a flexible range of motors and connecting cables.
Siemens presents new form of data transmission for busbar trunking systems
Added to Sivacon 8PS busbar trunking systems the new powerline technology will allow busbars to transmit not only current but also data. An additional data cable is no longer needed. The powerline module is integrated into the tap-off units along with communication-capable protection, switching and measuring devices. Measured data, such as power, current, and diagnostics information can then be forwarded to higher-level automation and energy management systems via the conductors on the busbars.
Press conference ahead of the Hannover Messe 2019
The Hannover Messe will be opening its doors once again at the beginning of April this year to welcome trade visitors from around the world. Journalists were cordially invited to the International Siemens Press Conference held in advance of the show:
This press conference gave an insight into technological developments and innovations which Siemens will be presenting at Hanover for the manufacturing and process industries at the Hannover Messe. This includes the integration of future technologies such as artificial intelligence, edge computing or additive manufacturing as well as digital solutions for energy supply, and the future of process automation.
This press conference gave an insight into technological developments and innovations which Siemens will be presenting at Hanover for the manufacturing and process industries at the Hannover Messe. This includes the integration of future technologies such as artificial intelligence, edge computing or additive manufacturing as well as digital solutions for energy supply, and the future of process automation.
Press Release18 February 2019
Siemens showcases smart solutions for industry-specific implementation of Industrie 4.0
- This year's trade fair slogan: "Digital Enterprise – Thinking industry further!"
- Setting course for the factory and process automation of the future
- Integrated energy solutions for digital enterprises
Event Pictures
Further HM Events
Contact
Link to this page
www.siemens.com/press/hm19
www.siemens.com/press/hm19