Internet Explorer, Chrome Browser, Firefox Browser, Safari Browser
Siemens at the Hannover Messe 2019
Hanover, 01 April to 05 April 2019
Save the date2019-04-01T00:00:002019-04-05T00:00:00Europe/Parisuse-titleSiemens at the Hannover Messe 2019This year's trade fair slogan "Digital Enterprise – Thinking industry further!"Roadmap for the factory and process automation of the futureScalable concept up to the MindSphere IoT operating system leads to renaissance on the shopfloorEnhanced portfolio: cutting-edge technologies such as artificial intelligence and Edge computing increase productivity and flexibilityHanover
On the first day of the Hannover Messe, April 1, Klaus Helmrich welcomed you to the annual Siemens Press Conference. As member of the Managing Board of Siemens AG, Klaus Helmrich is responsible for the Digital Industries Operating Company. The Press Conference took place at 6:30 PM in the Trade Fair's Convention Center, Room 1 A/B.
Mr. Helmrich talked about the latest developments of digitalization and the next step towards the digital transformation in the manufacturing and process industries under the theme "Digital Enterprise – Thinking industry further!".
Mr. Helmrich talked about the latest developments of digitalization and the next step towards the digital transformation in the manufacturing and process industries under the theme "Digital Enterprise – Thinking industry further!".
Save the date2019-04-01T00:00:002019-04-05T00:00:00Europe/Parisuse-titleSiemens at the Hannover Messe 2019This year's trade fair slogan "Digital Enterprise – Thinking industry further!"Roadmap for the factory and process automation of the futureScalable concept up to the MindSphere IoT operating system leads to renaissance on the shopfloorEnhanced portfolio: cutting-edge technologies such as artificial intelligence and Edge computing increase productivity and flexibilityHanover
On the first day of the Hannover Messe, April 1, Klaus Helmrich welcomed you to the annual Siemens Press Conference. As member of the Managing Board of Siemens AG, Klaus Helmrich is responsible for the Digital Industries Operating Company. The Press Conference took place at 6:30 PM in the Trade Fair's Convention Center, Room 1 A/B.
Mr. Helmrich talked about the latest developments of digitalization and the next step towards the digital transformation in the manufacturing and process industries under the theme "Digital Enterprise – Thinking industry further!".
Mr. Helmrich talked about the latest developments of digitalization and the next step towards the digital transformation in the manufacturing and process industries under the theme "Digital Enterprise – Thinking industry further!".
Press conference at the Hannover Messe 2019
Event Pictures
Booth Visit Merkel and Löfven
Information on Siemens at the Hannover Messe
Visitation Gerätewerk Erlangen
Booth Pictures
Press releases about products and solutions
Press Release02 April 2019
Siemens extends connectivity to all main substation assets
- SensgearTM technology launch for digital connectivity of switchgear products
- New Sensformer® advanced with applications based on digital twin simulation of transformers
- Portfolio extension comes with comprehensive data analytics for added transparency, enhanced productivity, and advanced intelligen...
Press Release02 April 2019
Siemens and EDAG cooperate in projects for the industrial application of additive manufacturing
- Improving engineering and production processes
Press Release01 April 2019
Software update for planning and simulation tool
- Integration into the digital workflow with data exchange via AutomationML
- Import and simulation of existing TIA Portal projects V15.1
- Configuration option of modular switches
- Simulation of broadcast with definition of broadcast limits
Press Release01 April 2019
Save time in engineering with the new Comos Version 10.3
- New engineering portal speeds up plant engineering
- Object queries now editable in Comos web application
- Modular engineering with intelligent templates and central data storage
Press Release01 April 2019
Highest computing and graphic performance for future technologies
- Highest computing and graphic performance through up to two Intel Xeon CPUs and Nvidia Quadro P5000 GPUs
- Platform for artificial intelligence (AI), automatic learning, edge computing and machine vision
- High degree of expandability through six PCIe slots, six USB interfaces and a serial port
- Product designed for industrial environments with full-metal enclosure and high electromagnetic compatibility (EMC)
Press Release01 April 2019
Simit V10.1 – More openness for even more integrated simulation
- Re-use of domain-specific simulation models
- Standardized interfaces for more system openness
- Real-time simulation of systems and machinery
Press Release01 April 2019
Simple machine integration with OPC UA interface
- Data interface according to OMAC PackML
- First implementation of companion specification in a controller
Press Release01 April 2019
Simatic PCS 7 Plant Automation Accelerator V3.0 - for more flexible and integrated plant engineering
- Simatic PCS 7 Plant Automation Accelerator V3.0 plant and automation engineering software closes the gap between plant engineering...
- More powerful, more open version
- Increased system openness based on GSDML and NE150 standards
- Seamless engineering through the integration of various Simatic components
Press Release01 April 2019
Web-based control system sets new standards in the process industry
- New development – Simatic PCS neo sets new standards in process automation
- Intuitive usability and a single workbench for all tasks
- Consistent object-oriented data management
- Unique, global, web-based collaboration in engineering and operation
- Scalable from small process modules up to the largest process plants in the world
Press Release01 April 2019
XHQ Operations Intelligence Software V6.0 – improved performance and end-user experience
- New Edge functionality provides better and more secure access to remote data
- Simplified integration of engineering data
- HTML5-based, new web browser client
- Server virtualization support increases efficiency and performance
Press Release01 April 2019
Industrial PC for cost-optimized applications in the industrial environment
- SIMATIC IPC527G: Platform for cost-optimized applications in the industrial environment
- High performance and flexibility, fast availability
- Protection of investment thanks to support of existing systems
Press Release29 March 2019
Virtual testing of Siemens Siprotec 5 protective devices with a digital twin
- Can be simulated in a cloud in just minutes
- Saves time and lowers operating costs
- Simplifies training and speeds up troubleshooting
Press Release28 March 2019
Siemens expands its portfolio for SF6-free medium-voltage switchgear
- 8DJH 12 switchgear is expanding the "blue GIS" portfolio in the medium-voltage range
- "Clean Air" used as the F gas-free insulating medium
- Follows the proven operating concept for load-break switchgear
- Connection to IoT platforms integrated
Press Release28 March 2019
New Simogear Reluctance Geared Motor – compact, rugged, and energy efficient
- Extremely high efficiency and low losses especially in partial load
- High dynamics due to low moment of inertia
- Safe operation due to low motor temperature
- Easy to commission – simply enter the motor code into the converter
Press Release28 March 2019
TIA Portal engineering – goes cloud!
- The TIA Portal moves into the cloud: flexible use of the engineering framework in various phases of development
- Fast, flexible access to pre-installed engineering environments
- Integration of the widest range of PC and tablet hardware into the development process
- Fast access to project data through storage in a cloud-based FileShare
Press Release26 March 2019
Siemens launches an initiative for fast ramp-up of production facilities together with industry partner companies
- Many companies and institutes from the University of Stuttgart are already participating in the "Fast Ramp-Up Challenge".
- Additional companies can join the initiative until May 23.
- Ramp-up of prototypes within only two days planned at the ARENA2036 innovation factory
- Open, cloud-based IoT operating system MindSphere in action
Press Release25 March 2019
Optical reader optimizes production processes and supply chains
- Higher reading rates and reading reliability
- Additional Gigabit Ethernet interface for diagnostic and service purposes
- Easy connection to cloud applications via Simatic S7-1500 and CP 1545-1
- Powerful, flexible accessories and easy handling
Press Release21 March 2019
Siemens CloudConnect simplifies IIoT data transfer to cloud-based solutions
- New CP 1545-1 communications processor for use with Simatic S7 1500
- New Simatic CloudConnect 7 Industrial IoT Gateway for existing systems
- Event-driven communication reduces network load and costsStandardized MQTT protocol enables transmission to various cloud platform...
Press Release14 March 2019
Sinamics S120 drive system - firmware and hardware updates increase user-friendliness
- New firmware V5.2 for even easier operation of Sinamics S120 drive systems
- Integration of the web server with new, responsive design and no special commissioning tools for diagnostics, maintenance and serv...
- Parallel connection of Active Line Modules (ALM) provides an extended performance range for booksize versions
- Users benefit from increased rated power without additional chassis unit and energy exchange in the DC link
Press Release28 February 2019
Sidrive IQ: Greater efficiency with Simotics Connect 400 connectivity module
- Size AH100 to AH450 low-voltage motors can be retrofitted in future with the Simotics Connect 400 connectivity module
- Simotics Connect 400 enables motor operating data to be sent to cloud-based Sidrive IQ Fleet App without any structural modificati...
- Regular evaluation improves efficiency, optimizes serviceability and makes for an extended service life
Press Release18 February 2019
Versatile, seamless across the system, safety integrated: new servo drive system for protective extra-low voltage range
- New Simatic Micro-Drive servo drive system for the protectiveextra-low voltage range system (under 60VDC) with scope for individual combination ...
Press Release18 February 2019
New digital service optimizes the maintenance of machines and plants
- Lifecycle Management Suite for optimal maintenance management
- Greater transparency of service activities and system status
- Maintenance Process optimization reduces maintenance costs
Press Release18 February 2019
New generation of high-end industrial PCs – high performance and flexibility in the industrial environment
- First rack, box and panel PCs with Xeon, Core i7, Core i5, Core i3 and 8th generation Celeron processors from Intel
- High level of data and system availability in the 19" rack or control cabinet, or directly on the machine
- Maximum expandability for flexible integration into new and existing systems
Press Release18 February 2019
Siemens updates NX Software with Artificial Intelligence and Machine Learning to increase productivity
- Latest release of NX software enhanced with new capabilities that leverage machine learning and artificial intelligence technology...
- Siemens' Digital Innovation Platform enhanced with machine learning-driven user-interface solutions to enhance design process impr...
Press Release18 February 2019
Siemens and Festo integrate Multi-Carrier-System into Bosch Rexroth transfer system
- Collaboration on new overall system
- More flexible, more efficient production processes
Press Release18 February 2019
Siemens to showcase new applications for machine-level edge computing
- Edge application Analyze MyWorkpiece /Capture enables data capturing around every aspect of workpiece machining
- Analyze MyWorkpiece /Toolpath designed for workpiece data visualization and analysis
- Edge application Analyze MyMachine /Condition determines the condition of machine tools
Press Release14 February 2019
powermanager power monitoring software with direct cloud connection
With the new version of the powermanager power monitoring software, power data can now be directly transferred into open, cloud-ba...
Press Release14 February 2019
Siemens presents new form of data transmission for busbar trunking systems
- Powerline technology added to Sivacon 8PS busbar trunking systems
- Current and data are transmitted in parallel via the conductors
- Additional data cables and complex cabling are no longer needed
Press Release12 February 2019
New IoT data platform facilitates entry into cloud-based energy management
With the 7KN powercenter3000 IoT data platform, Siemens is expanding its digitalization solutions for electrical power distributio...
Further Information
Press Pictures
Press conference ahead of the Hannover Messe 2019
Event Pictures
Contact
Link to this page
www.siemens.com/press/hm19
www.siemens.com/press/hm19